Gecko, Balboa, Hydroquip, USA heater parts

Repalcement spa heater parts for USA manufactured spa control systems from Gecko Electroics, Balboa Water Group, Hydroquip and others

diyelectrical.jpg



1.5" Spa Heater Split Nut

SKU: mp0121108015

1.5" heater union split nut NOT the common size (2" is most popular) Found on 40mm / 1.5" heater unions - on Dimension One spas and others OD = 72mm Thread = approx 63mm Sleeve collar internal di...

16 In Stock

login or register to view pricing

Login/Register

2" Heater Flat O Ring - Pair

SKU: tprmg-02-652g

2" heater flat o-ring pair Combination gasket and o ring in one for superior seal - installed each end of the heater tube This is the common size used in almost all stainless steel heaters. Can be used...

204 In Stock

login or register to view pricing

Login/Register

2" Heater Union Tailpiece - Male - suits Gecko, Balboa, Hydroquip, etc

SKU: hq42-0006A

Spa 2" flow through heater male tail - Suits 2" Heaters from Gecko, Hydroquip, Aquatemp, Balboa, RMF, Hydroquip, some Spaquip and others 2" / 50mm socket with male thread for heater locknut to screw on...

50 In Stock

login or register to view pricing

Login/Register

2.5" Spa Heater Split Nut - suits selected 3" heaters only

SKU: mp121108025

2.5" Spa Heater Split Nut to suit 3" heater tubes The nut has a built in collar to prevent it sliding off the tube. This nut is in 2 halves held together by 2 screws, however once assembled over the tube,...

5 In Stock

login or register to view pricing

Login/Register

Aquatemp Spa Heater Uni-Nut 2"

SKU: tp86-02335

2" Aquatemp spa heater uni-nut - female locking nut for union tail connection to heater tube - slides over heater tube flange. Used in conjunction with the Aquatemp Spa Heater Nut Collar. Actual OD is 85mm...

login or register to view pricing

Login/Register

Balboa 2" Heater Flat O Ring - Pair

SKU: b21619-2

Used on Balboa heater tubes Sold as a pair Gasket side (with rounded ridge) - outside diameter - 74mm, inside diameter - 53mm Square edged O-ring side - diameter of raised ring centre to centre - 63mm ...

66 In Stock

login or register to view pricing

Login/Register

Heater Element Hardware Kit

SKU: tp40-50000

Heater element hardware - element nuts, terminal nuts and o-rings Supplied standard with elements. Available here seperately for repair jobs. Used in USA made heater tubes used in Balboa, Gecko, Spa Builde...

3 In Stock

login or register to view pricing

Login/Register

Hydroquip 2" Spa Heater Snap Nut - suits Gecko, Balboa, Hydroquip, etc

SKU: hq42-0007B

2" Spa Heater Snap Nut Serves same function as the Aquatemp Uni-Nut and Split nuts This heater union nut has a snap in 'C' Clip once the nut has been slipped over the heater tube flange, to lock it together....

7 In Stock

login or register to view pricing

Login/Register

Stainless Steel Plug for Heater Pressure Switch Location 1/8" NPT

SKU: tprme4452k541

Used to plug an unused pressure switch threaded hole in heater tubes. The thread is 1/8" NPT - tapered thread. Due to the taper, if screwing into a plastic fitting, do not over-tighten or the expanding d...

7 In Stock

login or register to view pricing

Login/Register

Thermcore Aquatemp 2" Spa Heater Split Nut - suits Gecko, Balboa, Hydroquip, etc

SKU: mp0121108020

2" Spa Heater Split Nut - serves same function as the Aquatemp Uni-Nut, however suits older style Aquatemp, and all Balboa, Gecko Electronics, and some other heater tubes with flanges to wide in diameter for...

5 In Stock

login or register to view pricing

Login/Register

Waterway Plastics 2" Heater Flat O Ring - Pair

SKU: ww711-4030-2

Waterway Plastics 2" heater flat o-ring gasket pair This is the common size used in almost all stainless steel heaters. Combination gasket and o ring in one for superior seal - installed each end of t...

141 In Stock

login or register to view pricing

Login/Register