10A WIFI Controlled Spa or Pump/Blower Timer / Isolator

A modern upgrade from an air button operated 10A airswitch with timer:

Bluetooth / WiFi control from IOS and Android phones / devices with dedicated App 
Manual On / Off button 

Power On or Off to your spa remotely  
Set timeclock for desired daily run times and prevent running at night if pump noise disturbs neighbours 
or
Set a time off delay to automatically isolate the spa after a preset time 
This fuction also suits higher powered pumps or air blowers 

10A lead and socket

10A Maximum load for a single appliance only
230-250v, 50/60Hz 

NB. When power is interrupted to some spas the following may occur making this device potentially impractical for your installation due to loss of settings:
Set temperature may revert to a specific temperaturemperature such as 35c 
Timeclock might reset 
Filter times might reset 
Prior to purchase please assess your particular spas characteristics to see if there are changes that may be impacted with this device. You can do so by turning power off to the spa for 30-60 mins, re-energise and check what if any settings have reset, and what remains unchanged. In particular if the set temp and timeclock remain correct, the use of this device will not be an issue.