Aeware in.ye-5 Spa Control Pack - 3.0kw heater

Replacement Aeware in.ye-5 spa pack only  - in.ye-5 

Universal spa control system - 1, 2 or 3* pumps plus circulation pump, blower, ozone and light - many combinations possible -
3.0kw heater
5 outputs - can accomodate a combination of 5 of the following - 3 pumps, blower, circ pump, ozone, light, aux/audio
Output 1 = Pump,
output 2 = Pump or Blower,
output 3 = Blower or Circulation Pump,
output 4 = Ozone,
output 5 = 230v supply for Audio system, etc. or 24hr circ pump
3.0kw in-line heater 15" long x 2" stainless steel tube, complete with unions.

Utilises AMP cables to connect to equipment - Pump 1, Pump 2, Blower, Ozone, Circ Pump NOT INCLUDED.
All inputs and outputs are plugged directly into the sockets on the circuit board.
Incoming power supply is from the left side only through a 32mm hole (32mm gland/conduit fitting and appropriate cable set up required to maintain box seal against entry of vermin, ants, etc.)
230v, 50Hz, 15A - 40A max single phase, or 415v, 50Hz, 20A max two phase. 415v, 50Hz, 16A max three phase.
420mm wide x 270mm high x 115mm deep.
 * When used with 3 jet pumps and a circulation pump, all pumps must be single speed. Maximum pump current draw for Pump 1, Ozone, Circ pump and direct socket combined is 15A, Pump 2 & 3/blower combined is 20A Maximum current draw of any individual pump is 15A