Chemigem D10-Spa Automatic Spa Sanitiser & pH Dosing & Monitoring Kit - ONE ONLY - SUPER SPECIAL

ONE ONLY - SUPER SPECIAL

Automatic chemical dosing system designed for spas / hot water.
For use in commercial or residential applications.


Hot water requires alternate sanitation to normal swimming pools and therefore requires a very differently programmed controller to correctly dose spa specific chemicals.

The Chemigem D10-Spa water management system is specifically programmed / designed for hot water spa applications to control dosing of Bromine as a sanitiser and Bi-carb / base solution for pH control.
The system monitors and doses to maintain correct pH and sanitiser levels for guaranteed safe spa levels.
User settings allow for setting desired Bromine level and pH as well as adjustment of dose rates / times to maximise system efficiency and performance.
Because the system is monitoring and automatically dosing to maintain correct chemical levels, this unit is suitable for commercial installations where governing bodies are requiring the installation of Automatic Chemical monitoring systems, maximising bather safety and equipment longevity, whilst reducing labour to physically adjust settings.

The system utilises a solenoid flow valve to time dosing of concentrated bromine solution from the Erosion tablet feeder, and a peristaltic pump to time dosing of Bi-carb solution for pH control

Kit includes:
Chemigem D10-Spa water management system 
Rainbow 300 Erosion Bromine tablet feeder 
20L chemical drum for pH / Bi-carb solution
Peristaltic pump, Solenoid valve, Injection manifold
Plumbing/installation, programming and operating instructions.

User interaction once the system is set up is isolated to topping up bromine tablets in the erosion feeder and bi-carb solution in the 20L drum.


NB. This is not a standard D10 system designed for swimming pools. Those units control liquid chlorine and liquid acid for sanitation/pH control and are not suited to hot water spas