Edgetec Spa Bath Jet Tranquility Spanner - HIRE ONLY - Cost included Bond

Edgetec tranquility jet REMOVAL spanner

This tool is designed for the removal of Tranquility spa bath jets only

The cost of hire is $22.00 for a fortnight.
Subsequent charge of $11.00 per week or part thereof until received back into stock.
The remainder of the upfront charge is a refundable bond. 
You will be refunded the balance of upfront cost less hire charge on return/receipt of the tool in the condition it was supplied. 

The tool must be returned without damage or modification. Any silicon sealant should be cleaned off immediately.

To use the tool, the inner nozzle of the Tranquility jet needs to first be removed by pulling it straight out of the jet assembly.
Once removed the slots of the chrome threaded wall fitting are exposed.
Engage the tool in these slots and use a screwdriver or similar through the hole in the tool to allow anti-clockwise rotation to remove the threaded wall fitting.
Avoid downward pressure against the jet, to prevent the body from popping away from the rear of the bath shell.

Use a suitable silicone sealant to re-seal the new fitting back into the jet body. Do up hand tight plus 1/4 turn. Clean off any silicone sealant from the jet and the tool.
Push the new jet nozzle assembly into the jet assembly until it clicks into place.