Balboa Purezone with Hover - Floating Remote Water Care Testing & Monitoring - Universal Stand Alone App Based

Manufactured by Balboa, but able to be used in any spa with any existing control system

Does not require a Balboa spa control system - use on any spa or swim spa regardless of controller brand
Purely stand alone App based spa water testing system.

Do not remove from the spa whilst using your spa - leaving the Lab Unit/Cassette out of water for more than 1 hour, including whilst using the spa will damage it if it dries out.  Keep away from heat/direct sunlight or the cassette will lose its ability to conduct tests. If you do remove it, place in a bucket of water beside the spa.

Using the App, schedule every-other-day or daily automated testing, and then let Purezone® do the measuring while you're home or away.
See results and expert water care advice in-App, in just minutes.

Each test measures:
pH 
Free Chlorine (FC) or Total Bromine (TB) 
Total Alkalinity (TA) 

Each P3 cassette contains 48 tests, and lasts up to 60 days in water.
Approx. $0.93 per day to operate

Purezone® is designed for above ground, outdoor residential spas made of acrylic, vinyl, fiberglass or rotomolded plastic.

Purezone® also works in the following conditions:

• Salt water chlorine generator spas
• Copper Ionization
• Inground spas

One P3 cassette included with the Purezone Hover - up to 48 tests/60 days testing.

Additional P3 cassette 3 packs available - providing up to 180 days/6 months coverage Listed here

The Purezone® App shows:

• Current temperature, including last testing date and time
• Spa temperature history graph configurable to 1-day, 1-week, 1-month, 3-months, 6-months or 1-year
• Alerts – communication regarding replacing a cassette, recharging the battery, adjusting the chlorine level, and similar
• Last test readings of Free Chlorine (FC), Balance (pH), Total Alkalinity (TA), including the last test date and time
• Chemical ranges – Graphs showing your trending water test readings
  
  NB - do not remove the Purezone from the spa for any length of time. The cassette will lose its ability to test if dried out. 
  
  Purezone Help Centre Here

Re-charging - A fully charged battery should last approx 120 days / 4 months - charge the unit for 4-6 hours for a full charge. Complete a charge whilst changing cassettes after 60/120 days. If you need to recharge whilst a cassette still has available tests, ensure you keep the Lab Unit wet by putting it in a bucket of water or similar whilst charging the Battery with the wireless charger 

Do not leave the Lab Unit/Cassette out of water for more than 1 hour, including whilst using the spa. Keep away from heat/direct sunlight or the cassette will lose its ability to conduct tests.