Pump Wet End Parts

Spa pump wet end parts and fittings including complete wet ends, impellers, mechanical seals, wear rings, faceplates, volutes, and screws to suit many makes and models:
Waterway Plastics, Aquaflo XP2 and Circ-Master, Piranha, Xylem ITT Laing Thermotech, Davey Spaquip, SpaNet, Waterco, Trifo and more



Waterway Pump Union 2" 90 Degree Sweep Ell 2"S

SKU: ww400-5800

...

13 In Stock

login or register to view pricing

Login/Register

Waterway Pump Union 2.5" Suction with 2" socket tail - suits Executive Pumps

SKU: ww400-5991

Waterway 2.5" pump suction union assembly - 2.5" union nut with 2" socket tail piece If the front suction union nut is larger than the discharge union nut, it will be this type - found on early Waterway Exe...

4 In Stock

login or register to view pricing

Login/Register

Waterway Tiny Might Circulation Pump Wet End

SKU: ww310-9000

Waterway Tiny Might circulation pump wetend complete ...

1 In Stock

login or register to view pricing

Login/Register

Waterway Viper 2.2kw (5hp) Pump Wetend Complete

SKU: ww310-0180

Waterway Viper pump wetend complete - 2.2kw, (5hp USA) Complete with volute, faceplate, body o-ring, impeller, mechanical seal, and wear ring. Uses a 5/8" standard type 6 seal. O-ring is seated in a groove a...

2 In Stock

login or register to view pricing

Login/Register

Waterway Viper Pump Impeller - 5hp

SKU: ww310-2620

Waterway Viper pump impeller 5hp 92mm diameter, 7 x vanes, 19mm vane width Unique design - approx 30 degree pitched front/rear plates creating a concave rear / convex front Mechanical seal to su...

4 In Stock

login or register to view pricing

Login/Register

Waterway Viper Pump Impeller 4HP

SKU: ww310-2200P

Waterway Viper pump impeller - 4hp Grey Diameter rear plate - 97mm Diameter front plate - 96mm Vane width - 22.5mm 6 vanes Mechanical seal to suit is a 5/8" standard type 6 (not the usual Waterway 5...

3 In Stock

login or register to view pricing

Login/Register

Xylem (ITT Laing Thermotech) E-10 & E-14 Circulation Pump body O-ring seal

SKU: lha00039003

Body O-ring seal to suit Xylem (formerly ITT Laing) E-10 & E-14 circulation pumps only. Does not suit earlier SM959 pumps with square gasket seals or E-10 pumps with metal mounting bases....

login or register to view pricing

Login/Register

Xylem (ITT Laing Thermotech) E-10 & E-14 Circulation Pump cable entry gland assembly

SKU: lhae10gland

Cable gland / strain relief assembly to suit Xylem (formerly ITT Laing) E-10 and E-14 circulation pumps Consists of a locknut, strain relief, washer and water seal....

44 In Stock

login or register to view pricing

Login/Register

Xylem (ITT Laing Thermotech) E-10 circulation pump - Rotor Assembly

SKU: lhb07230009

Xylem (formerly ITT Laing) E-10 rotor assembly - suits E-10 circulation pumps with plastic 'finger style' bases only Does not suit E-10 pumps with metal base plates or any version of SM9xx series pumps ...

10 In Stock

login or register to view pricing

Login/Register

Xylem (ITT Laing Thermotech) E-14 circulation pump - Rotor Assembly

SKU: lhb07230010

Xylem (formerly ITT Laing) E-14 rotor assembly Xylem E-14 rotor assembly includes the impeller, magnetic section and carbon bearing - this is a one piece unit that cannot be dismantled further. This rotor ...

4 In Stock

login or register to view pricing

Login/Register