Hot Pump - Ethink KL8870 Spa control system and LX TDA100 - 10A

Spa Hot Pump - 10A
Ethink KL8870 series spa control system with 7 way touchpad, 1.5kw heater and LX TDA100 1.0hp pump
Comprises: 
Ethink KL8800 control box, 
Ethink H220-15 1.5kw heater - 300mm long including unions, 
Ethink KL8870 7 button touchpad. Touchpad size - 155mm x 73mm
LX TDA100 1.0hp pump

Supplied with 10A power cable and auxillary cable for air blower connection
Outputs:
1. Pump 1: Single speed
2. Blower: single speed 
Can also connect -
3. Ozone: 240v or Ethink 12v unit. 
4. Light: any 12v AC incandescent lamp or LED lamp up to 12w/1A, either 2 wire 12v AC or 4 wire Ethink 12v DC
5. Auxillary output for stereo power supply connection or optional Ethink Bluetooth module.

6. Heater: H220 1.5kw only. 1.5" / 40mm plumbed. 

Heaters must be mounted horizontally with the sensor union fitted to inlet side of heater. The heater can be positioned on the suction or discharge side of the pump (discharge side for low flow circ pumps)

Power requirements:
10A standard power outlet.

Equipment protection:
Ethink KL8800 control box and heater, and LX pump must be weather and splash protected. Ensure they are installed in a well ventilated, dry location, preferably under the spa.

Warranty:
2 year return to base equipment warranty covers repair or replacement of any component that fails due to manufacturing defect within 2 years of sale to the consumer.

Replaces obsolete hot pumps such as:
onga 4352,
Finsbury Portapac
Waterco Portapac
Davey XS series spa pool hot pump.

Commonly known as a hot pump, porta-pack or portapack