Hot Pump Replacement - Zink KL8870 Spa control system and LX WP150 1.5hp 2 speed pump - 10A

SKU:
Hotpump10-2spd
Shipping:
Calculated at checkout

Available Options

login or register to view pricing

Login/Register

Product Description

Spa Hot Pump Replacement with two speed 1.5hp pump - 10A system


Perfect replacement for Davey Xcelsior 350P hot pump

Zink KL8870 series spa control system with 7 way touchpad, 2.0kw heater and LX WP150 1.5hp two speed pump
Comprises: 
Zink KL8800 control box, 
Zink H220-20 2.0kw heater - 300mm long including unions, 
Zink KL8870 7 button touchpad. Touchpad size - 155mm x 73mm
LX 1.5hp 2 speed pump

Supplied with 10A power cable and auxillary cable for air blower connection
Outputs:
1. Pump 1: Two speed
2. Blower: single speed 
Can also connect -
3. Ozone: 240v or Zink 12v unit. 
4. Light: any 12v AC incandescent lamp or LED lamp up to 12w/1A, either 2 wire 12v AC or 4 wire Zink 12v DC
5. Auxillary output for stereo power supply connection or optional Zink Bluetooth module.

6. Heater: H220 2.0kw. 1.5" / 40mm plumbed. 

Heaters must be mounted horizontally with the sensor union fitted to inlet side of heater. The heater can be positioned on the suction or discharge side of the pump (discharge side for low flow circ pumps)

Power requirements:
10A standard power outlet.

Equipment protection:
Zink KL8800 control box and heater, and LX pump must be weather and splash protected. Ensure they are installed in a well ventilated, dry location, preferably under the spa.

Warranty:
2 year return to base equipment warranty covers repair or replacement of any component that fails due to manufacturing defect within 2 years of sale to the consumer.

Replaces obsolete hot pumps such as:
Davey Xcelsior hot pumps
other 1.5hp hot pumps

NB. This system includes a high performance 1.5hp LX pump - suited to spas fitted with 10-12 jets.


This setup allows the use of a 1.5hp pump on 10A power. With a single speed pump of this size, a minimum of 15A is required.
Additionally, the use of a 2 speed pump which is set to heat on low speed only, means the heater rating can be increased to 2.0kw for faster heating and more energy efficient operation.


Benefits of this system compared to a single speed pump system:
Quiet operation on low speed for filtering and heating cycles 
Larger heater capability 
Results in approx 37% pump running cost saving for filtration and heating cycles compared to a 1.0hp single speed pump ... more when compared to a 1.5hp single speed pump
Importantly - allows a more powerful pump to operate on a 10A power point. No need to upgrade to a 15A circuit.


More From This Category

Hot Pump - Zink KL8870 Spa control system and LX TDA100 - 10A

Hot Pump - Zink KL8870 Spa control system and LX TDA100 - 10

SKU: Hotpump10

login or register to view pricing

Login/Register
Hot Pump - Zink KL8870 Spa control system and LX TDA100, 2kw - 15A

Hot Pump - Zink KL8870 Spa control system and LX TDA100, 2kw

SKU: Hotpump15-1hp

login or register to view pricing

Login/Register
Hot Pump Replacement - Zink KL8870 Spa control system and LX WP150 1.5hp 2 speed pump - 10A

Hot Pump Replacement - Zink KL8870 Spa control system and LX

SKU: Hotpump10-2spd

login or register to view pricing

Login/Register
Waterco Portapac Demand Hot Pump Mk4 - 10A, 1hp

Waterco Portapac Demand Hot Pump Mk4 - 10A, 1hp

SKU: wc45551404

login or register to view pricing

Login/Register
Waterco Portapac Demand Hot Pump Mk4 - 15A, 1.5hp

Waterco Portapac Demand Hot Pump Mk4 - 15A, 1.5hp

SKU: wc45551414

login or register to view pricing

Login/Register