Hot Pump Replacement - Ethink KL8870 Spa control system and LX WP150 1.5hp 2 speed pump - 10A
Spa Hot Pump Replacement with two speed 1.5hp pump - 10A system
Perfect replacement for Davey Xcelsior 350P hot pump
Ethink KL8870 series spa control system with 7 way touchpad, 2.0kw heater and LX WP150 1.5hp two speed pump
Ethink KL8800 control box,
Ethink H220-20 2.0kw heater - 300mm long including unions,
Ethink KL8870 7 button touchpad. Touchpad size - 155mm x 73mm
LX 1.5hp 2 speed pump
Supplied with 10A power cable and auxillary cable for air blower connection
1. Pump 1: Two speed
2. Blower: single speed
Can also connect -
3. Ozone: 240v or Ethink 12v unit.
4. Light: any 12v AC incandescent lamp or LED lamp up to 12w/1A, either 2 wire 12v AC or 4 wire Ethink 12v DC
5. Auxillary output for stereo power supply connection or optional Ethink Bluetooth module.
6. Heater: H220 2.0kw. 1.5" / 40mm plumbed.
Heaters must be mounted horizontally with the sensor union fitted to inlet side of heater. The heater can be positioned on the suction or discharge side of the pump (discharge side for low flow circ pumps)
10A standard power outlet.
Ethink KL8800 control box and heater, and LX pump must be weather and splash protected. Ensure they are installed in a well ventilated, dry location, preferably under the spa.
2 year return to base equipment warranty covers repair or replacement of any component that fails due to manufacturing defect within 2 years of sale to the consumer.
Replaces obsolete hot pumps such as:
Davey Xcelsior hot pumps
other 1.5hp hot pumps
NB. This system includes a high performance 1.5hp LX pump - suited to spas fitted with 10-12 jets.
This setup allows the use of a 1.5hp pump on 10A power. With a single speed pump of this size, a minimum of 15A is required.
Additionally, the use of a 2 speed pump which is set to heat on low speed only, means the heater rating can be increased to 2.0kw for faster heating and more energy efficient operation.
Benefits of this system compared to a single speed pump system:
Quiet operation on low speed for filtering and heating cycles
Larger heater capability
Results in approx 37% pump running cost saving for filtration and heating cycles compared to a 1.0hp single speed pump ... more when compared to a 1.5hp single speed pump
Importantly - allows a more powerful pump to operate on a 10A power point. No need to upgrade to a 15A circuit.